No. 565 General Purpose

Application:
Ph565 is designed for use as a general purpose, low-temperature lubricating oil for operation in the temperature range of -65°f to 250°f (-45°c to 122°c). It is especially useful where a light oil of low evaporation rate which provides rust protection is desired.

Characteristics:
Ph565 is a clear, highly refined blend of petroleum base stock and additives, witch provide. Excellent resistance to oxidation, protection against rusting, and limit galvanic corrosion.

Description of General Purpose

Test (ASTM)
D287
Table 8
 
 
D445
D445
D92
D97
D130
​FTM 5308
 
 
 
 
 
 
 
 
 
 

​202
 
 
Spec

Description 
Gravity, Api @ 60°F (15°C), Degrees
Pounds Per Gallon
Appearance:  Clear, Transparent, And Uniform
Color, ASTM, No.
​Viscosity @ 100°F (38°C), cSt
Viscosity @ -40°F(- °C), cSt
Flash Point, COC, °F (°C)
Pour Point, °F (°C)
Copper Strip Corrosion: 3 Hours @ 210°F (100°C)
Corrosion-0xidation Stability: 168 Hours @ 250°F (122°C) Corrosion; Pitting Or Etching
Copper Wt. Loss, Mg/Cm2
Steel Wt. Loss, Mg/Cm2
Aluminum Wt. Loss, Mg/Cm2
Magnesium Wt. Loss, Mg/Cm2
Cadmium Wt. Loss, Mg/Cm2
Separation Or Gumming
Change In Viscosity @ 100°F (38°c)
Change In Neutralization No.
Oil Weight Loss, %
Protection, H.C., Hours
Low Temperature Stability: 72 Hours., @ -65°F (-54°C)
Evaporation Loss: 22 Hours. @ 210°F (100°C),%
Corrosivity Test: 10 Days @ 80°F (27°C)
Workmanship

Specification Requirements
Report
Report
Pass
5 Maximum
10 Minimum
4000 Minimum
265 Minimum
-70 Maximum
1a Maximum

None
± 0.2 Maximum
± 0.2 Maximum
± 0.2 Maximum
± 0.2 Maximum
± 0.2 Maximum
None
-5 To +20
0.20 Maximum
8 Maximum
100 Minimum
Pass
22 Maximum
Pass
Pass

Result
29
7.34
Pass
4
10.8
3380
300 (149)
<-69 (<-56)
Pass

None
± 0.03
± 0.02
-0.02
-0.01
-0.03
None
+3.9
0.05
1.1
Pass
Pass
18.9
Pass
Pass